Stainless Steel Products

Product Details:

SS UNS S31603 Round Bars, SUS 316L Flat Bar Exporter, SS 316L Square Bar, 316L SS Bar, Rods Leading Manufacturers. ... Also known as UNS S31603 Bars, these 316L Stainless Steel bars are at length used in the oil and gas and chemical industries for its cost efficient corrosion resistance and easiness of fabrication.

One of India's leading producers of high-quality stainless steel 316L round bars and rods that are used in a variety of industries is Bhavya Steel. 316L Stainless Steel Round Bars and Rods is the best choice if you are looking for an austenitic stainless steel grade that is suitable for machining. It has the compositional properties that make it the best choice. Due to the increased level of sulphur in its composition, SS 316L Round Bars are especially suitable for extensive machining procedures. These SS 316L Rods have a decent resistance to corrosion, but because they contain sulfur, they are significantly less resistant than grade 316. These SS 316L Seamless Bars, also known as UNS S31603, are not affected by heat treatment and cannot be hardened. We provide high-quality Stainless Steel 316 Welded Tubes in a variety of sizes and shapes that are designed in accordance with national and international raw material quality standards.

Specifications : ASTM A 276 / SA 276

Dimensions : ASTM, ASME

Range : 3.17 MM TO 350 MM DIA

Diameter : 25mm to 152mm

Length : 1 to 6 Meters, Custom Cut Lengths

Finish : Bright, Polish & Black

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

Condition : Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

 

Product Details:

Combination 310/310S Pipes, which is a composite of iron and different components, fundamentally carbon. Due to its high rigidity and ease, Stainless Steel 310 Seamless Pipes is a significant segment in structures, foundation, apparatuses, ships, vehicles, machines, apparatuses, and weapons. Treated Steel 310S Welded Pipes is base metal is iron, which can take on two crystalline structures (allotropic structures), body-focused cubic (BCC) and face-focused cubic (FCC), contingent upon its temperature. Treated Steel 310 EFW Pipes is the collaboration of those allotropes with the alloying components, basically carbon that gives steel and cast iron their scope of exceptional properties. In the body-focused cubic plan of Stainless Steel 310S ERW Pipes, there is an iron iota in the focal point of each block, though in the face-focused cubic, there is one at the focal point of every one of the six essences of the 3D square. In unadulterated iron, the precious stone structure of Stainless Steel 310 Round Pipes has moderately little protection from the iron molecules slipping past each other, thus unadulterated iron is very bendable, or delicate and effectively shaped. In Stainless Steel 310S Square Pipes, modest quantities of carbon, different components, and incorporations inside the iron go about as solidifying operators that forestall the development of disengagements that in any case happen in the precious stone cross sections of iron molecules.

Product Details:

Stainless Steel Angle 316 is normally used in natural gas/petroleum/oil, aerospace, food and beverage, industrial, cryongenic, architectural, and marine applications. Stainless Steel Angle 316 has high strength and excellent corrosion resistance, including in marine or extremely corrosive environments. It is stronger, though less malleable and machinable than 304, 316 maintains its properties in cryogenic or high temperatures. 316 stainless steel angle is available in full size and custom cut lengths.

Product Details:

The Stainless Steel 410 Flats offer excellent wear and tear resistance property and good corrosion resistant to chemical and aqueous media. The stainless steel 410 grade is martensitic in nature that contains 11% chromium, which provides adequate resistant to nitric and acidic media. This grade achieves excellent mechanical properties when it gets to proceed to harden and temper. It is generally used in applications which require mild corrosion, high strength, and heat resistance.
Bhavya Steel offers stainless steel flats as per application requirement. These flats comply with standards of quality and it is accessible in customizes specifications. These organizations provide superior quality of Stainless Steel 410 Flats at affordable rates.

Our 410 stainless steel can be used in applications such as dental and surgical instruments, pipelines, valves and nozzles, automotive parts and more. 410 SS is generally used for applications which involve mild corrosion, high strength, and heat resistance.  Depending on the application and performance requirements we also provide 410 stainless steel casting equivalent, CA15.

The Stainless Steel 410 Flats have good resistance to chemical and aqueous media corrosion as well as excellent wear and tear resistance. The martensitic 410 grade of stainless steel has a chromium content of 11%, providing adequate resistance to nitric and acidic media. When it is allowed to continue to harden and temper, this grade achieves excellent mechanical properties. Most of the time, it's used in applications that need to be resistant to heat, strong, and resistant to mild corrosion.

Specifications-
• Grade: Stainless Steel 410 Flats
• Standard: SS 410, UNS S41000, ASTM A240 & ASME SA 240, works off nr. 1.4000
• Surface finish: black, bright, annealed and polished
• Thickness: 0.3mm to 120mm
• Size: 1000mm x 2000mm, 1220mm x 2440mm, 1250mm x 2500m, 1500mm x 3000mm, 2000mm x 4000mm to 6000mm

Product Details:

Bhavya Steel is the most noticeable investor, provider and maker of good nature of ss 409m sheets and plates to their clients everywhere throughout the world. The business is the ISO guaranteed licensed and provider of 409M items. 

Purchasers want to purchase the plates from them since they offer quality administrations on their items. Important administrations, for example, top of the line completing, precise measurements and great solidness of the item are a portion of the administrations. 

Also, the business has long stretches of involvement with assembling SS plates in high calibre. The business offers effective quality, minimal effort support, great execution and unwavering quality of the item. An industry offers Stainless Steel 409m items in modified size, shapes and thickness according to the necessity of the item around the world.ss 409m sheets and plates

Specifications : ASTM A240 / ASME SA240

Dimensions : ASTM, ASME, and API

Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Thickness : 4mm-100mm

Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Product Details:

ERW pipes are made with 25% of chromium and 20% nickel and offer high corrosion resistance. These SS 310 ERW pipes are austenitic in nature and they are widely used in applications with high carburizing atmospheres. These SS DIN 1.4845 ERW Pipes are strongly resistant against nitric acid, sulfuric acid and they also offer resistance from the toxic gasses and steam. SS UNS S31000 ERW Pipes are often used at cryogenic temperatures. SS 310 ERW Pipes are used widely in equipment and utensils for processing and handling of food, beverages and dairy products

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Packing and transportation by your side