Stainless Steel Sheet

Product Details:

We provide a broad range of Stainless Steel Sheets in the market. These are available in different dimensions and finishes.

Product Details:

Bhavya steel is one of the prominent production house for Alloy 316 / 316L Sheets Plates Coils, which are usually limited in use to relatively thin sections due to lack of toughness in welds. However, where welding is not required, Stainless Steel 316 Sheets offer a wide range of applications. High Chromium with additions of Molybdenum can be used for these Stainless Steel 316 Plates in quite aggressive conditions such as sea water. Stainless Steel 316 Coils are also chosen for their resistance to stress corrosion cracking, which are further not as formable as austenitic stainless steels. These Stainless Steel 316L Sheets are magnetic, which cannot be hardened by heat treatment. Stainless Steel 316L Plates are the most common, where their microstructure is derived from the addition of Nickel, Manganese and Nitrogen. These Stainless Steel 316L Coils is the same structure as occurs in ordinary steels at much higher temperatures. This structure gives these Stainless Steel 316 Slatting Coils their characteristic combination of weldability and formability. Corrosion resistance of these Stainless Steel 316 Perforated Coils can be enhanced by adding Chromium, Molybdenum and Nitrogen. SS 316L Slatting Coils cannot be hardened by heat treatment but have the useful property of being able to be work hardened to high strength levels whilst retaining a useful level of ductility and toughness. These standard u>SS 316L Perforated Coils are vulnerable to stress corrosion cracking.

Product Details:

Stainless steel 304 and 304L are also known as stainless steel 1.4301 and 1.307 respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Type 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. Type 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. Some products such as plate and pipe may be available as “dual certified” material that meets the criteria for both 304 and 304L. 304H, a high carbon content variant, is also available for use at high temperatures. Property given in this data sheet is typical for flat rolled products covered by ASTM A240/A240M. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this data sheet.

Application

• Saucepans, Springs, screws, nuts & bolts, Sinks & splash backs, Architectural panelling, Tubing, Brewery, food, dairy and pharmaceutical production equipment, Sanitary ware and troughs, Cutlery and flatware

Product Details:

Hot Rolled Sheet provide a rougher surface than cold rolled steel and plate. When galvanized, it is also used in applications where corrosion resistance is necessary. High strength and highly formable HR steel sheet and plate are easy to drill, form and weld. Hot rolled steel sheet and plate are available as standard hot rolled or hot rolled P&O.
Some of the benefits include increased malleability, high rate of production, and lower when compared to cold rolling. Applications include:

• Building & construction
• Automotive & transportation
• Shipping containers
• Roofing
• Appliances
• Heavy equipment

Product Details:

Stainless Steel 410 Sheet/ Plate is found to be widely used in numerous applications in commercial industry. We can source a wide range of products in diverse grades, specification and sizes to meet the special requirements of our customers. This grade offers corrosion resistance in steam, mild environments, and many chemical environments. Our product range comes in unique and customizable sizes and dimensions of steel plates or sheets. Our materials require going through strict quality tests, thus offering long service life with high quality.
Features of Stainless steel 410 sheets/ plate:
• High strength
• Toughness
• Durability
• Great corrosion resistance to nitric acid and sulfuric acid
• High mechanical properties
• Hardness
• Magnetic property

410 Stainless Steel Plate is generally martensitic stainless steel that can be hardened. It combines chromium stainless steel's superior resistance to corrosion with the superior wear resistance of high carbon alloys. The strength of 410 SS plate, its excellent ductility, and its resistance to rust in mild environments like steam and light chemical environments make it a good choice for parts that are under a lot of stress.

Product Details:

WE have stock of Stainless steel sheets in vairous grade

SS 304 /SS 316L/SS 409
SS 410/SS 310/SS 202 

Size - 1250 x 5000 / 1250 x 6000. or in various cut size 

Additional Information:

• Delivery Time: 3 days

Product Details:

310 Stainless Steel sheet The high carbon content, which is present to enhance creep properties, has a detrimental effect on aqueous corrosion resistance. The alloy is prone to intergranular corrosion after long term exposure at high temperatures. However, due to its high chromium content (25%), Alloy 310 is more corrosion resistant than most heat resistant alloys.

High Temperature Corrosion
The high chromium (25%) and silicon (0.6%) content of Alloy 310 make it more resistant to high temperature corrosion in most in-service environments. Operating temperatures are listed below.

Oxidizing conditions (max sulfur content – 2 g/m3)
1922°F (1050°C) continuous service
2012°F (1100°C) peak temperature

Oxidizing conditions (max sulfur greater than 2 g/m3)
1742°F (950°C) maximum temperature

Low oxygen atmosphere (max sulfur content – 2 g/m3)
1832°F (1000°C) maximum temperature

Nitriding or carburizing atmospheres
1562 – 1742°F (850 – 950°C) maximum

The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.

Additional Information:

• Item Code: 72191100
• Delivery Time: 2

Product Details:

Stainless steel checkered plates supplied by us, are widely used as flooring plates in construction, machine building, container, manufacturing, shipbuilding, ...

Additional Information:

• Delivery Time: Ready stock

Product Details:

316LN (UNS S31653) is a lowcarbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances.

The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion.

Product Details:

We are offering to our clients, a high quality range of steel and plates made of Jindal Stainless Steel Sheets

Additional Information:

• Delivery Time: 3 days

Product Details:

Stainless Steel 904L Sheets/Plates. The ASTM B625 SS 904L sheets we produce are made utilizing the highest caliber of crude materials from our huge stock. The SS UNS N08904 sheets offer extraordinary resistivity against erosion and oxidation. Nexus Impex houses all the advanced hardware and innovation which helps the SS 904L plates to be increasingly bendable and stable.

The ASTM B625 SS 904L sheets offer incredible obstruction against erosion and oxidation. The sheets offer extraordinary welding qualities. Creation properties of SS UNS N08904 sheets are additionally acceptable. The SS 904L sheets likewise offer great durability however the strength of these sheets loses at higher temperatures. We give ASTM B625 SS 904L sheets in an assortment of range including strong wedge, equal wedge, split wedge, adaptable wedge just as various alternatives of gasket and organ pressing to suit impeccably the necessary activities. We likewise furnish certain reports with our items which guarantee the nature of our items. A portion of the records that we give incorporate 100% Radiography Test Report, Raw Materials Certificate, Fumigation Certificates, Packing List including net weight and gross weight, number of boxes, Marks and Numbers, Certificate of Origin legitimized/authenticated by Chamber of Commerce or Embassy and Test Certificates ensuring NACE MR0103, NACE MR0175. 
Uses of the SS 904L sheets are wide and utilized in different ventures. Synthetic Processing and Oil and Gas Production businesses are a portion of the enterprises that utilization 904L Plates. Mash and Paper, Pharmaceutical Industry, and Metallurgical Processing industry are a portion of different uses of the 904L Sheets

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Packing and Transportation by your side